আমাদের প্রতিটি ফাইল TEST করা । আমরা প্রথমে ফাইল গুলি ব্যাবহার করে দেখি তার পর Upload করি । কোন ফাইল আপনার ফোনে কাজ না করলে আমাদের জানাবেন ।ধন্যবাদ আমাদের সাইট ব্যাবহার করার জন্য । যে কোন প্রয়োজনে আমাদের কল করতে পারেন । আপনার নিজের নামে Blog বানাতে কল +8801746777643 +8801616777643 আমাদের প্রতিটা ফাইল Password করা। এবং প্রতিটি file এর password এর মুল্য ১০০ টাকা।
Saturday 19 December 2020
Invens V1 air Flash File MT6580 6.0 CM2 READ FIRMWARE
Reading Flash Content now ...
xGPT : Normalize settings Ok!
Brand : O1
ProdName : V1
ProdModel : U22
Device : Vision_V1
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-m0.mp1-V2.34_zechin6580.we.m_P68
[Read Ok] : preloader_zechin6580_weg_m.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6580 / V1.1.2 / zechin6580_weg_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1590 MiB
Scatter saved to : C:\Users\GSM YOUSUF\Desktop\MT6580__O1__U22__Vision_V1__6.0__alps-mp-m0.mp1-V2.34_zechin6580.we.m_P68\
All done!
Done!
Elapsed: 00:06:20
Reconnect Power/Cable!
HISENSE U962 FLASH FILE SP7731CEA 6.0 CM2 READ FIRMWARE @ CM2 FLASH
Phone found! [ 25 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name : U962
Model Brand : Hisense
Model Device: HS7731CSP
AndrVersion : 6.0
BaseBand CPU: SP7731CEA_FS259
Project Ver : Hisense_U962_S04_20170606
Model Ext : Hisense U962
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : fbootlogo3.bin
[Read Ok] : fbootlogo4.bin
[Read Ok] : fbootlogo5.bin
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 2729 MiB
Saved to : C:\Users\GSM YOUSUF\Desktop\SP7731CEA_FS259_HS7731CSP_6.0_Hisense_U962_S04_20170606_Hisense_U962_1017122020\
Done!
Elapsed: 00:12:25
Sunday 22 November 2020
SAMSUNG J701FXXU3 UFI BOX RED DUMP FILE(512MB)
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: BJTD4R (0x424a54443452), rev: 0x00, serial number: 0x7738FE05
Manufacturing date: Jan 2018
CID: 15010042 4A544434 52007738 FE051520
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
PADI
Monday 2 November 2020
WALTON Primo_NF4 FLASH FILE (1GB)-(2GB) RAM
DA : USB : HIGH-SPEED
Boot done!
Patch Level : O11019
Display ID : Primo_NF4_20190809_V13
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-12-05
Build Time : 1547289035
Product Model : Primo NF4
Product Brand : WALTON
Product Name : Primo_NF4
Product Device : Primo_NF4
Product Manfct : WALTON
Product Info : Primo_NF4
Product Board : WALTON
Board Platform : mt6739
MT6739__WALTON__Primo_NF4__8.1.0__Primo_NF4_20190809_V13__O11019__Primo_NF4
Read : preloader.bin
Read : recovery.img
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : spmfw.img
Read : mcupmfw.img
Read : nvram.bin
Read : lk.bin
Read : loader_ext.img
Read : boot.img
Read : logo.bin
Read : odmdtbo.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 17%
Read : system.img
ExtSparse : Compression ratio : 11%
Read : cache.img
Read : userdata.img
FW Size : 1.44 GB
Android Info saved : _Android_info.txt
Scatter : MT6739_Android_scatter.txt
Saved to : D:\BOLGDESNIG\MT6739__WALTON__Primo_NF4__8.1.0__Primo_NF4_20190809_V13__O11019__Primo_NF4\
Done!
Elapsed: 00:03:10
1GB RAM
2GB RAM
WALTON Primo_NF4 FLASH FILE (1GB)-(2GB) RAM
DA : USB : HIGH-SPEED
Boot done!
Patch Level : O11019
Display ID : Primo_NF4_20190809_V13
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-12-05
Build Time : 1547289035
Product Model : Primo NF4
Product Brand : WALTON
Product Name : Primo_NF4
Product Device : Primo_NF4
Product Manfct : WALTON
Product Info : Primo_NF4
Product Board : WALTON
Board Platform : mt6739
MT6739__WALTON__Primo_NF4__8.1.0__Primo_NF4_20190809_V13__O11019__Primo_NF4
Read : preloader.bin
Read : recovery.img
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : spmfw.img
Read : mcupmfw.img
Read : nvram.bin
Read : lk.bin
Read : loader_ext.img
Read : boot.img
Read : logo.bin
Read : odmdtbo.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 17%
Read : system.img
ExtSparse : Compression ratio : 11%
Read : cache.img
Read : userdata.img
FW Size : 1.44 GB
Android Info saved : _Android_info.txt
Scatter : MT6739_Android_scatter.txt
Saved to : D:\BOLGDESNIG\MT6739__WALTON__Primo_NF4__8.1.0__Primo_NF4_20190809_V13__O11019__Primo_NF4\
Done!
Elapsed: 00:03:10
2GB RAM
Sunday 18 October 2020
Micronex MX 53 Plus Flash File MT6580 5.1 CM2 READ FIRMWARE
Reading Flash Content now ...
xGPT : Normalize settings Ok!
Brand : alps
ProdName : MX_53_Plus
ProdModel : MX-53 Plus
Device : MX_53_Plus
AndroidVer: 5.1
CU_SWVer : V1.1.5
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55
[Read Ok] : preloader_hct6580_weg_a_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6580 / V1.1.2 / hct6580_weg_a_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1462 MiB
Scatter saved to : C:\Users\MD YOUSUF\Desktop\MT6580__alps__MX-53_Plus__MX_53_Plus__5.1__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55\
All done!
Done!
Elapsed: 00:07:06
Reconnect Power/Cable!
Wednesday 14 October 2020
OPPO A83 CPH1729EX DUMP FILE UFI BOX READ 512MB
RPMB: 4096 KiB
User area: 14.56 GiB(15,634,268,160 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID System Info:
platform: MT6763, cpu abi: arm64-v8a
manufacturer: OPPO
board: full_oppo6763_17101, name: A83js
brand: OPPO, model: OPPO A83js ()
build model list: OPPO A83js ()
build id: N6F26Q, version: 7.1.1 Nougat (A83jsEX_11_A.25_190329)
build description: full_oppo6763_17101-user 7.1.1 N6F26Q 1553824824 release-keys
crypto state: encrypted?
Custom moviNAND command is not supported for this device(MMC51).
Selected: [SAMSUNG] KMQE60013M-B318/16GB+LPDDR3 16Gb (BGA221)
LAVA iris65 FLASH FILE S117 mt6739 8.1.0 100% OK FILE
DA : USB : HIGH-SPEED
Boot done!
Patch Level : O11019
Display ID : LAVA_iris65_1_8_S128_INT_18J15
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-09-05
Build Time : 1539570310
Product Model : iris65
Product Brand : LAVA
Product Name : iris65
Product Device : iris65
Product Manfct : LAVA
Product Info : iris65
Board Platform : mt6739
MT6739__LAVA__iris65__8.1.0__LAVA_iris65_1_8_S128_INT_18J15__O11019__iris65
Read : preloader.bin
Read : recovery.img
Read : persist.img
ExtSparse : Compression ratio : 100%
Read : md1rom.img
Read : md1dsp.img
Read : spmfw.img
Read : mcupmfw.img
Read : lk.bin
Read : loader_ext.img
Read : boot.img
Read : logo.bin
Read : odmdtbo.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 54%
Read : system.img
ExtSparse : Compression ratio : 8%
Read : cache.img
Read : userdata.img
FW Size : 1.23 GB
Android Info saved : _Android_info.txt
Scatter : MT6739_Android_scatter.txt
Saved to : C:\Users\MD YOUSUF\Desktop\MT6739__LAVA__iris65__8.1.0__LAVA_iris65_1_8_S128_INT_18J15__O11019__iris65\
Done!
Elapsed: 00:01:47
Tuesday 13 October 2020
Invens A1 air Flash File MT6580 6.0 CM2 READ FIRMWARE
oot done!
Patch Level : MRA58K
Display ID : Air_J01_MJL_Android_A1_V01_2019-03-23
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2017-01-05
Build Time : 1553311886
Board Platform : mt6580
Product Info : zechin6580_weg_m
Product Model : U22
Product Brand : O1
Product Device : Air_A1
Product Board : A1
Product Name : A1
Product Manfct : Air
MT6580__Air__U22__6.0__Air_J01_MJL_Android_A1_V01_2019-03-23__MRA58K__zechin6580_weg_m
SecureDevice : Plain
Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 19%
Read : cache.img
Read : userdata.img
FW Size : 1.28 GB
Android Info saved : _Android_info.txt
Scatter : MT6580_Android_scatter.txt
Saved to : C:\Users\MD YOUSUF\Desktop\MT6580__Air__U22__6.0__Air_J01_MJL_Android_A1_V01_2019-03-23__MRA58K__zechin6580_weg_m\
Done!
Elapsed: 00:05:45
Sunday 11 October 2020
SAMSUNG J5007 DUMP FILE UFI BOX SM-J5007ZTS1 DUMP FULL FILE
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QN16BB (0x514e31364242), rev: 0x00, serial number: 0x4279CCCF
Manufacturing date: Jul 2016
CID: 15010051 4E313642 42004279 CCCF73C4
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 7.28 GiB(7,818,182,656 bytes)
PAID
SAMSUNG J5007 DUMP FILE UFI BOX SM-J5007ZTS1 DUMP 512MB FILE
https://www.youtube.com/watch?v=spnvy7pdYwc&feature=youtu.be
Subscribe to:
Posts (Atom)