OPPO A3S CPH1853 DUMP FIRMWARE FILE UFI BOX FULL DUMP FILE

 Init bus...

VCC: 3.3 V, VCCQ: 1.8 V

Bus: 1 bit (SDR 24MHz)

Access mode: sector mode

Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)

 Card/BGA: BGA (Discrete embedded) - High density MMC

 Manufacturer ID: 0x15 (Samsung)

 Product name: QE63MB (0x514536334d42), rev: 0x04, serial number: 0xE1D9AA4C

 Manufacturing date: Feb 2019

CID: 15010051 4536334D 4204E1D9 AA4C2660

CSD: D0270132 0F5903FF F6DBFFEF 8E40400C

EXT_CSD revision: 1.8 (MMC v5.1) 

Partition info:

 Boot1: 4096 KiB

 Boot2: 4096 KiB

 RPMB: 4096 KiB

 User area: 14.56 GiB(15,634,268,160 bytes)

CPH1853A3S

OPPO A3S CPH1803 DUMP FIRMWARE FILE UFI BOX FULL DUMP FILE

Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed

Interface: UFI High-Speed

Serial number: 0011-8842-5443

 Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)

Insertion test... Done

Init bus...

VCC: 3.3 V, VCCQ: 1.8 V

Bus: 1 bit (SDR 4MHz)

Access mode: sector mode

Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)

 Card/BGA: BGA (Discrete embedded) - High density MMC

 Manufacturer ID: 0x15 (Samsung)

 Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0x7D4D06ED

 Manufacturing date: Aug 2018

CID: 15010051 4536334D 42037D4D 06ED85C4

CSD: D0270132 0F5903FF F6DBFFEF 8E40400C

EXT_CSD revision: 1.8 (MMC v5.1) 

Partition info:

 Boot1: 4 MiB

 Boot2: 4 MiB

 RPMB: 4 MiB [Provisioned, counter: 176805]

 User area: 14.56 GiB(15,634,268,160 bytes)

Cache size: 64 MiB

Hardware reset function: 1

Partition configuration: 0x38

 No boot acknowledge is sent (default)

 User area is enabled for boot

Partitioning support: 0x07

 Device support partitioning feature

 Device can have enhanced technological features

 Device partitioning possible

Boot configuration protection: 0x00

Boot bus conditions: 0x00

Boot area write protection: 0x00

CPH1803

ANDROID System Info:

 platform: msm8953, cpu abi: arm64-v8a

 manufacturer: OPPO

 board: msm8953, name: CPH1803

 brand: OPPO, model: CPH1803 (OPPO A3s)

 build model list: CPH1803 (OPPO A3s)

 build id: OPM1.171019.026, version: 8.1.0 [Oreo] (CPH1803EX_11_A.34)

 build description: msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20210122.143520 release-keys

crypto state: encrypted?

Custom moviNAND command is not supported for this device(MMC51).

Selected: [SAMSUNG] KMQE60013M-B318/16GB+LPDDR3 16Gb   (BGA221)

 

OPPO A53 CPH 2137 DUMP FILE EMCP UFI BOX FULL FILE

 Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed

Interface: UFI High-Speed

Serial number: 0011-8842-5443

 Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)

Insertion test... Done

Init bus...

VCC: 3.3 V, VCCQ: 1.8 V

Bus: 1 bit (SDR 24MHz)

Access mode: sector mode

Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)

 Card/BGA: BGA (Discrete embedded) - High density MMC

 Manufacturer ID: 0x90 (SK Hynix)

 Product name: hB8aP (0x68423861503e), rev: 0x03, serial number: 0x328A84FB

 Manufacturing date: Mar 2020

CID: 90014A68 42386150 3E03328A 84FB37E2

CSD: D0270032 8F5903FF FFFFFFEF 8E400042

EXT_CSD revision: 1.8 (MMC v5.1) 

Partition info:

 Boot1: 4 MiB

 Boot2: 4 MiB

 RPMB: 16 MiB [Provisioned, counter: 7943]

 User area: 29.12 GiB(31,268,536,320 bytes)

Cache size: 2 MiB

Hardware reset function: 1

Partition configuration: 0x38

 No boot acknowledge is sent (default)

 User area is enabled for boot

Partitioning support: 0x07

 Device support partitioning feature

 Device can have enhanced technological features

 Device partitioning possible

Boot configuration protection: 0x00

Boot bus conditions: 0x00

Boot area write protection: 0x00

crypto state: encrypted?

eMMC selected: [HYNIX] H9TQ27ADFTMCUR/32GB  (BGA221)

cph2137

 

OPPO A53 CPH2131 DUMP FILE UFS 8GB EASY JTAG BOX

 

OPPOV AX7 CPH1903 DUMP FIRMWARE FILE UFI BOX

 Bus: 1 bit (SDR 24MHz)

Access mode: sector mode

Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)

 Card/BGA: BGA (Discrete embedded) - High density MMC

 Manufacturer ID: 0x15 (Samsung)

 Product name: GP6BMB (0x475036424d42), rev: 0x01, serial number: 0x8761AC47

 Manufacturing date: Oct 2018

CID: 15010047 5036424D 42018761 AC47A5E8

CSD: D0270132 0F5903FF F6DBFFEF 8E40400C

EXT_CSD revision: 1.8 (MMC v5.1) 

Partition info:

 Boot1: 4096 KiB

 Boot2: 4096 KiB

 RPMB: 16384 KiB

 User area: 58.24 GiB(62,537,072,640 bytes)

Cache size: 64 MiB

Hardware reset function: 1

Partition configuration: 0x38

 No boot acknowledge is sent (default)

 User area is enabled for boot

Partitioning support: 0x07

 Device support partitioning feature

 Device can have enhanced technological features

 Device partitioning possible

Boot configuration protection: 0x00

Boot bus conditions: 0x00

Boot area write protection: 0x00

 Power-on write protection: possible

 Permanent write protection: possible

 Lock status: not locked

CPH1903

ANDROID System Info:

 platform: msm8953, cpu abi: arm64-v8a

 manufacturer: OPPO

 board: msm8953, name: CPH1903

 brand: OPPO, model: CPH1903 (OPPO AX7)

 build model list: CPH1903 (OPPO AX7)

 build id: OPM1.171019.026, version: 8.1.0 Oreo (CPH1903EX_11_A.26)

 build description: msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20201013.205032 release-keys

crypto state: encrypted?

Custom moviNAND command is not supported for this device(MMC51).

Detected: SAMSUNG moviNAND KMGP6000BM-BXXX/64G

 

CPH1823 F9 DUMP FIRMWARE FILE UFI BOX

 Init bus...

VCC: 3.3 V, VCCQ: 1.8 V

Bus: 1 bit (SDR 24MHz)

Access mode: sector mode

Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)

 Card/BGA: BGA (Discrete embedded) - High density MMC

 Manufacturer ID: 0x90 (SK Hynix)

 Product name: HCG8a4 (0x484347386134), rev: 0xA5, serial number: 0x09776034

 Manufacturing date: Jan 2018

CID: 90014A48 43473861 34A50977 60341550

CSD: D0270132 8F5903FF FFFFFFEF 8A400026

EXT_CSD revision: 1.8 (MMC v5.1) 

Partition info:

 Boot1: 4096 KiB

 Boot2: 4096 KiB

 RPMB: 4096 KiB

 User area: 58.24 GiB(62,537,072,640 bytes)

CPH1823

OPPO CPH1729EX A83js DUMP FIRMWARE FILE UFI BOX

RPMB: 4096 KiB

 User area: 14.56 GiB(15,634,268,160 bytes)

Cache size: 64 MiB

Hardware reset function: 1

Partition configuration: 0x48

 Boot acknowledge is sent during the boot operation

 Boot partition 1 is enabled for boot

Partitioning support: 0x07

 Device support partitioning feature

 Device can have enhanced technological features

 Device partitioning possible

Boot configuration protection: 0x00

Boot bus conditions: 0x00

Boot area write protection: 0x00

 Power-on write protection: possible

 Permanent write protection: possible

 Lock status: not locked

A83js

ANDROID System Info:

 platform: MT6763, cpu abi: arm64-v8a

 manufacturer: OPPO

 board: full_oppo6763_17101, name: A83js

 brand: OPPO, model: OPPO A83js ()

 build model list: OPPO A83js ()

 build id: N6F26Q, version: 7.1.1 Nougat (A83jsEX_11_A.25_190329)

 build description: full_oppo6763_17101-user 7.1.1 N6F26Q 1553824824 release-keys

crypto state: encrypted?

Custom moviNAND command is not supported for this device(MMC51).

Selected: [SAMSUNG] KMQE60013M-B318/16GB+LPDDR3 16Gb   (BGA221)

 

OPPO A1K CPH1923 DUMP FIRMWARE FILE UFI BOX

  onnection status: XHCI:HUB3:USB 2.00 High-Speed

Interface: UFI High-Speed

Serial number: 0011-8842-5443

 Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)

Insertion test... Done

VCCQ not properly connected

Init bus...

VCC: 3.3 V, VCCQ: 1.8 V

Bus: 1 bit (SDR 24MHz)

Access mode: sector mode

Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)

 Card/BGA: BGA (Discrete embedded) - High density MMC

 Manufacturer ID: 0x15 (Samsung)

 Product name: QD63MB (0x514436334d42), rev: 0x03, serial number: 0x2B3E9777

 Manufacturing date: Aug 2019

CID: 15010051 4436334D 42032B3E 9777867E

CSD: D0270132 0F5903FF F6DBFFEF 8E40400C

EXT_CSD revision: 1.8 (MMC v5.1) 

Partition info:

 Boot1: 4096 KiB

 Boot2: 4096 KiB

 RPMB: 16384 KiB

 User area: 29.12 GiB(31,268,536,320 bytes)

Cache size: 64 MiB

Hardware reset function: 1

Partition configuration: 0x48

 Boot acknowledge is sent during the boot operation

 Boot partition 1 is enabled for boot

Partitioning support: 0x07

 Device support partitioning feature

 Device can have enhanced technological features

 Device partitioning possible

Boot configuration protection: 0x00

Boot bus conditions: 0x02

  Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)

Boot area write protection: 0x00

 Power-on write protection: possible

 Permanent write protection: possible

 Lock status: not locked

CPH1923

ANDROID System Info:

 platform: MT6765, cpu abi: arm64-v8a

 manufacturer: OPPO

 board: oppo6762_18540, name: CPH1923

 brand: OPPO, model: CPH1923 (OPPO A1k)

 build model list: CPH1923 (OPPO A1k)

 build id: PPR1.180610.011, version: 9 Pie (CPH1923EX_11_A.36)

 build description: full_oppo6762_18540-user 9 PPR1.180610.011 eng.root.20201009.233612 release-keys

crypto state: encrypted?

crypto state: encrypted?

Custom moviNAND command is not supported for this device(MMC51).

Detected: SAMSUNG moviNAND KMQD60003M-BXXX/32G

OPPO A37F DUMP FIRMWARE FILE UFI BOX 256 MB

 Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed

Interface: UFI High-Speed

Serial number: 0011-8842-5443

 Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)

Insertion test... Done

Init bus...

VCC: 3.3 V, VCCQ: 1.8 V

Bus: 1 bit (SDR 24MHz)

Access mode: sector mode

Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)

 Card/BGA: BGA (Discrete embedded) - High density MMC

 Manufacturer ID: 0x15 (Samsung)

 Product name: QE13MB (0x514531334d42), rev: 0x07, serial number: 0x507E9B0F

 Manufacturing date: Mar 2017

CID: 15010051 4531334D 4207507E 9B0F340A

CSD: D0270132 0F5903FF F6DBFFEF 8E40400C

EXT_CSD revision: 1.8 (MMC v5.1) 

Partition info:

 Boot1: 4 MiB

 Boot2: 4 MiB

 RPMB: 4 MiB [Authentication Key not yet programmed]

 User area: 14.56 GiB(15,634,268,160 bytes)

Cache size: 64 MiB

Hardware reset function: 1

Partition configuration: 0x38

 No boot acknowledge is sent (default)

 User area is enabled for boot

Partitioning support: 0x07

 Device support partitioning feature

 Device can have enhanced technological features

 Device partitioning possible

Boot configuration protection: 0x00

Boot bus conditions: 0x00

Boot area write protection: 0x00

User area write protection: 0x10

 Password protection features: enabled 

 Power-on write protection: possible

 Permanent write protection: not possible

 Lock status: not locked

A37f ()

ANDROID System Info:

 platform: msm8916, cpu abi: arm64-v8a

 manufacturer: OPPO

 board: msm8916, name: A37f

 brand: OPPO, model: A37f ()

 build model list: A37f ()

 build id: LMY47V, version: 5.1.1 [Lollipop] (A37fEX_11_171008)

 build description: msm8916_64-user 5.1.1 LMY47V eng.root.20171008.172519 release-keys

Internal storage: 11.02 GiB

crypto state: unencrypted

Custom moviNAND command is not supported for this device(MMC51).

Selected: [SAMSUNG] KMQE10013M-B318/16GB+LPDDR3 16Gb   (BGA221)

SAMSUNG SM- G610F DUMP FILE UFI BOX 384MB

 Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed

Interface: UFI High-Speed

Serial number: 0011-8842-5443

 Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)

Insertion test... Done

Init bus...

VCC: 3.3 V, VCCQ: 1.8 V

Bus: 1 bit (SDR 24MHz)

Access mode: sector mode

Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)

 Card/BGA: BGA (Discrete embedded) - High density MMC

 Manufacturer ID: 0x15 (Samsung)

 Product name: AJNB3R (0x414a4e423352), rev: 0x03, serial number: 0x260EECFF

 Manufacturing date: Jun 2017

CID: 15010041 4A4E4233 5203260E ECFF64D8

CSD: D0270132 0F5903FF F6DBFFEF 8E40400C

EXT_CSD revision: 1.7 (MMC v5.0, v5.01) 

Partition info:

 Boot1: 4 MiB

 Boot2: 4 MiB

 RPMB: 4 MiB [Provisioned, counter: 2]

 User area: 14.68 GiB(15,758,000,128 bytes)

Cache size: 64 MiB

Partition configuration: 0x48

 Boot acknowledge is sent during the boot operation

 Boot partition 1 is enabled for boot

Partitioning support: 0x07

 Device support partitioning feature

 Device can have enhanced technological features

 Device partitioning possible

Boot configuration protection: 0x00

Boot bus conditions: 0x01

  Bus width: x4 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)

Boot area write protection: 0x00

User area write protection: 0x10

 Password protection features: enabled 

 Power-on write protection: possible

 Permanent write protection: not possible

 Lock status: not locked

SM-G610Fdump

ANDROID System Info:

 platform: exynos5, cpu abi: armeabi-v7a

 manufacturer: samsung

 board: universal7870, name: on7xeltedd

 brand: samsung, model: SM-G610F

 build model list: SM-G610F

 build id: M1AJQ, version: 8.1.0 [Oreo] (M1AJQ.G610FDDU1CSB3)

 build description: on7xeltedd-user 8.1.0 M1AJQ G610FDDU1CSB3 release-keys

crypto state: encrypted?

Detected: SAMSUNG moviNAND KMAJN000B3-RXXX/16G

SAMSUNG SM-A260G DUMP FILE UFI BOX 256MB

 Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed

Interface: UFI High-Speed

Serial number: 0011-8842-5443

 Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)

Insertion test... Done

Init bus...

VCC: 3.3 V, VCCQ: 1.8 V

Bus: 1 bit (SDR 24MHz)

Access mode: sector mode

Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)

 Card/BGA: BGA (Discrete embedded) - High density MMC

 Manufacturer ID: 0x45 (SanDisk)

 Product name: DG4008 (0x444734303038), rev: 0x01, serial number: 0x1461B80C

 Manufacturing date: Apr 2019

CID: 45010044 47343030 38011461 B80C460C

CSD: D00F0032 8F5903FF FFFFFFEF 8A404022

EXT_CSD revision: 1.8 (MMC v5.1) 

Partition info:

 Boot1: 4 MiB

 Boot2: 4 MiB

 RPMB: 4 MiB [Provisioned, counter: 2]

 User area: 7.28 GiB(7,818,182,656 bytes)

Cache size: 4 MiB

Partition configuration: 0x48

 Boot acknowledge is sent during the boot operation

 Boot partition 1 is enabled for boot

Partitioning support: 0x07

 Device support partitioning feature

 Device can have enhanced technological features

 Device partitioning possible

Boot configuration protection: 0x00

Boot bus conditions: 0x01

  Bus width: x4 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)

Boot area write protection: 0x00

User area write protection: 0x10

 Password protection features: enabled 

 Power-on write protection: possible

 Permanent write protection: not possible

 Lock status: not locked

SM-A260Gdump

ANDROID System Info:

 platform: exynos5, cpu abi: armeabi-v7a

 manufacturer: samsung

 board: universal7870_go, name: a2coreltedd

 brand: samsung, model: SM-A260G

 build model list: SM-A260G

 build id: OPR6, version: 8.1.0 [Oreo] (OPR6.A260GDDS7ATH1)

 build description: a2coreltedd-user 8.1.0 OPR6 A260GDDS7ATH1 release-keys

crypto state: encrypted?

eMMC selected: [HYNIX] SDINBDG4-8GC  (BGA153)

WALTON GM3_plus FULL DUMP FIRMWARE FILE UFI BOX

Setting interface to EasyJtag2/E-Socket

Setting bus width to 8 Bit

Setting frequence to 42 MHz

EMMC Device Information :

EMMC CID: 90014A484147346132A44CE36A343451

EMMC CSD: D02701328F5903FFFFFFFFE78A400017

EMMC Manufacture : SKHYNIX , EMMC NAME: HAG4a2 , HEX: 484147346132 , S/N: 4CE36A34 , rev. 0xA4

EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 3/2017

   EMMC ROM 1 (Main User Data) Capacity: 15032 MB (0003AB800000)

   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)

   EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Clean

EMMC Permanent Write Protection: No

EMMC Temporary Write Protection: No

Extended CSD Information :

Extended CSD rev: 1.8 (MMC 5.1)

Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)

Boot Bus Config: 0x00 , width 1bit

H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled

Supported partition features [PARTITIONING_SUPPORT]: 0x07

Device supports partitioning features

Device can have enhanced technological features in partitions and user data area

Device can have extended partitions attribute

Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00

Backup saved: HAG4a2_4CE36A34_20210904_002711.extcsd

EMMC Init completed.

Get firmware version

Primo GM3 plus

Brand = WALTON

Manufacturer = WALTON

Device = Primo_GM3_plus

Model = Primo GM3 plus

CPU Abi = armeabi-v7a

Android release = 8.1.0

Security Patch = 2018-04-05

Firmware version = Primo_GM3_plus_T1620180524_V04

Firmware date = Thu May 24 18:55:01 CST 2018

 

NOKIA 1 FULL DUMP FIRMWARE FILE UFI BOX

Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed

Interface: UFI High-Speed

Serial number: 0011-8842-5443

 Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)

Insertion test... Done

Init bus...

VCC: 3.3 V, VCCQ: 3.0 V

Bus: 4 bit (HS SDR 24MHz)

Access mode: sector mode

Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)

 Card/BGA: BGA (Discrete embedded) - High density MMC

 Manufacturer ID: 0x90 (SK Hynix)

 Product name: H8G4a2 (0x483847346132), rev: 0xA5, serial number: 0x32C44C65

 Manufacturing date: Oct 2018

CID: 90014A48 38473461 32A532C4 4C65A56A

CSD: D0270132 8F5903FF FFFFFFE7 8A400016

EXT_CSD revision: 1.8 (MMC v5.1) 

Partition info:

 Boot1: 4 MiB

 Boot2: 4 MiB

 RPMB: 4 MiB [Provisioned, counter: 34489]

 User area: 7.28 GiB(7,818,182,656 bytes)

Cache size: 1 MiB

Hardware reset function: 1

Partition configuration: 0x48

 Boot acknowledge is sent during the boot operation

 Boot partition 1 is enabled for boot

Partitioning support: 0x07

 Device support partitioning feature

 Device can have enhanced technological features

 Device partitioning possible

Boot configuration protection: 0x00

Boot bus conditions: 0x00

Boot area write protection: 0x00

(Nokia 1 dump)

ANDROID System Info:

 platform: MT6737M, cpu abi: armeabi-v7a

 manufacturer: alps

 board: Frontier_00WW, name: Frontier_00WW

 brand: Nokia, model: Nokia 1 ()

 build model list: Nokia 1 ()

 build id: O11019, version: 8.1.0 [Oreo] (00WW_1_40A)

 build description: Frontier_00WW-user 8.1.0 O11019 00WW_1_40A release-keys

crypto state: encrypted?

Selected: [HYNIX] H9TQ64A8GTCCUR/8GB   (BGA221)