OPPO A37F DUMP FIRMWARE FILE UFI BOX 256 MB

 Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed

Interface: UFI High-Speed

Serial number: 0011-8842-5443

 Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)

Insertion test... Done

Init bus...

VCC: 3.3 V, VCCQ: 1.8 V

Bus: 1 bit (SDR 24MHz)

Access mode: sector mode

Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)

 Card/BGA: BGA (Discrete embedded) - High density MMC

 Manufacturer ID: 0x15 (Samsung)

 Product name: QE13MB (0x514531334d42), rev: 0x07, serial number: 0x507E9B0F

 Manufacturing date: Mar 2017

CID: 15010051 4531334D 4207507E 9B0F340A

CSD: D0270132 0F5903FF F6DBFFEF 8E40400C

EXT_CSD revision: 1.8 (MMC v5.1) 

Partition info:

 Boot1: 4 MiB

 Boot2: 4 MiB

 RPMB: 4 MiB [Authentication Key not yet programmed]

 User area: 14.56 GiB(15,634,268,160 bytes)

Cache size: 64 MiB

Hardware reset function: 1

Partition configuration: 0x38

 No boot acknowledge is sent (default)

 User area is enabled for boot

Partitioning support: 0x07

 Device support partitioning feature

 Device can have enhanced technological features

 Device partitioning possible

Boot configuration protection: 0x00

Boot bus conditions: 0x00

Boot area write protection: 0x00

User area write protection: 0x10

 Password protection features: enabled 

 Power-on write protection: possible

 Permanent write protection: not possible

 Lock status: not locked

A37f ()

ANDROID System Info:

 platform: msm8916, cpu abi: arm64-v8a

 manufacturer: OPPO

 board: msm8916, name: A37f

 brand: OPPO, model: A37f ()

 build model list: A37f ()

 build id: LMY47V, version: 5.1.1 [Lollipop] (A37fEX_11_171008)

 build description: msm8916_64-user 5.1.1 LMY47V eng.root.20171008.172519 release-keys

Internal storage: 11.02 GiB

crypto state: unencrypted

Custom moviNAND command is not supported for this device(MMC51).

Selected: [SAMSUNG] KMQE10013M-B318/16GB+LPDDR3 16Gb   (BGA221)

SAMSUNG SM- G610F DUMP FILE UFI BOX 384MB

 Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed

Interface: UFI High-Speed

Serial number: 0011-8842-5443

 Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)

Insertion test... Done

Init bus...

VCC: 3.3 V, VCCQ: 1.8 V

Bus: 1 bit (SDR 24MHz)

Access mode: sector mode

Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)

 Card/BGA: BGA (Discrete embedded) - High density MMC

 Manufacturer ID: 0x15 (Samsung)

 Product name: AJNB3R (0x414a4e423352), rev: 0x03, serial number: 0x260EECFF

 Manufacturing date: Jun 2017

CID: 15010041 4A4E4233 5203260E ECFF64D8

CSD: D0270132 0F5903FF F6DBFFEF 8E40400C

EXT_CSD revision: 1.7 (MMC v5.0, v5.01) 

Partition info:

 Boot1: 4 MiB

 Boot2: 4 MiB

 RPMB: 4 MiB [Provisioned, counter: 2]

 User area: 14.68 GiB(15,758,000,128 bytes)

Cache size: 64 MiB

Partition configuration: 0x48

 Boot acknowledge is sent during the boot operation

 Boot partition 1 is enabled for boot

Partitioning support: 0x07

 Device support partitioning feature

 Device can have enhanced technological features

 Device partitioning possible

Boot configuration protection: 0x00

Boot bus conditions: 0x01

  Bus width: x4 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)

Boot area write protection: 0x00

User area write protection: 0x10

 Password protection features: enabled 

 Power-on write protection: possible

 Permanent write protection: not possible

 Lock status: not locked

SM-G610Fdump

ANDROID System Info:

 platform: exynos5, cpu abi: armeabi-v7a

 manufacturer: samsung

 board: universal7870, name: on7xeltedd

 brand: samsung, model: SM-G610F

 build model list: SM-G610F

 build id: M1AJQ, version: 8.1.0 [Oreo] (M1AJQ.G610FDDU1CSB3)

 build description: on7xeltedd-user 8.1.0 M1AJQ G610FDDU1CSB3 release-keys

crypto state: encrypted?

Detected: SAMSUNG moviNAND KMAJN000B3-RXXX/16G

SAMSUNG SM-A260G DUMP FILE UFI BOX 256MB

 Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed

Interface: UFI High-Speed

Serial number: 0011-8842-5443

 Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)

Insertion test... Done

Init bus...

VCC: 3.3 V, VCCQ: 1.8 V

Bus: 1 bit (SDR 24MHz)

Access mode: sector mode

Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)

 Card/BGA: BGA (Discrete embedded) - High density MMC

 Manufacturer ID: 0x45 (SanDisk)

 Product name: DG4008 (0x444734303038), rev: 0x01, serial number: 0x1461B80C

 Manufacturing date: Apr 2019

CID: 45010044 47343030 38011461 B80C460C

CSD: D00F0032 8F5903FF FFFFFFEF 8A404022

EXT_CSD revision: 1.8 (MMC v5.1) 

Partition info:

 Boot1: 4 MiB

 Boot2: 4 MiB

 RPMB: 4 MiB [Provisioned, counter: 2]

 User area: 7.28 GiB(7,818,182,656 bytes)

Cache size: 4 MiB

Partition configuration: 0x48

 Boot acknowledge is sent during the boot operation

 Boot partition 1 is enabled for boot

Partitioning support: 0x07

 Device support partitioning feature

 Device can have enhanced technological features

 Device partitioning possible

Boot configuration protection: 0x00

Boot bus conditions: 0x01

  Bus width: x4 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)

Boot area write protection: 0x00

User area write protection: 0x10

 Password protection features: enabled 

 Power-on write protection: possible

 Permanent write protection: not possible

 Lock status: not locked

SM-A260Gdump

ANDROID System Info:

 platform: exynos5, cpu abi: armeabi-v7a

 manufacturer: samsung

 board: universal7870_go, name: a2coreltedd

 brand: samsung, model: SM-A260G

 build model list: SM-A260G

 build id: OPR6, version: 8.1.0 [Oreo] (OPR6.A260GDDS7ATH1)

 build description: a2coreltedd-user 8.1.0 OPR6 A260GDDS7ATH1 release-keys

crypto state: encrypted?

eMMC selected: [HYNIX] SDINBDG4-8GC  (BGA153)

WALTON GM3_plus FULL DUMP FIRMWARE FILE UFI BOX

Setting interface to EasyJtag2/E-Socket

Setting bus width to 8 Bit

Setting frequence to 42 MHz

EMMC Device Information :

EMMC CID: 90014A484147346132A44CE36A343451

EMMC CSD: D02701328F5903FFFFFFFFE78A400017

EMMC Manufacture : SKHYNIX , EMMC NAME: HAG4a2 , HEX: 484147346132 , S/N: 4CE36A34 , rev. 0xA4

EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 3/2017

   EMMC ROM 1 (Main User Data) Capacity: 15032 MB (0003AB800000)

   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)

   EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Clean

EMMC Permanent Write Protection: No

EMMC Temporary Write Protection: No

Extended CSD Information :

Extended CSD rev: 1.8 (MMC 5.1)

Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)

Boot Bus Config: 0x00 , width 1bit

H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled

Supported partition features [PARTITIONING_SUPPORT]: 0x07

Device supports partitioning features

Device can have enhanced technological features in partitions and user data area

Device can have extended partitions attribute

Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00

Backup saved: HAG4a2_4CE36A34_20210904_002711.extcsd

EMMC Init completed.

Get firmware version

Primo GM3 plus

Brand = WALTON

Manufacturer = WALTON

Device = Primo_GM3_plus

Model = Primo GM3 plus

CPU Abi = armeabi-v7a

Android release = 8.1.0

Security Patch = 2018-04-05

Firmware version = Primo_GM3_plus_T1620180524_V04

Firmware date = Thu May 24 18:55:01 CST 2018

 

NOKIA 1 FULL DUMP FIRMWARE FILE UFI BOX

Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed

Interface: UFI High-Speed

Serial number: 0011-8842-5443

 Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)

Insertion test... Done

Init bus...

VCC: 3.3 V, VCCQ: 3.0 V

Bus: 4 bit (HS SDR 24MHz)

Access mode: sector mode

Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)

 Card/BGA: BGA (Discrete embedded) - High density MMC

 Manufacturer ID: 0x90 (SK Hynix)

 Product name: H8G4a2 (0x483847346132), rev: 0xA5, serial number: 0x32C44C65

 Manufacturing date: Oct 2018

CID: 90014A48 38473461 32A532C4 4C65A56A

CSD: D0270132 8F5903FF FFFFFFE7 8A400016

EXT_CSD revision: 1.8 (MMC v5.1) 

Partition info:

 Boot1: 4 MiB

 Boot2: 4 MiB

 RPMB: 4 MiB [Provisioned, counter: 34489]

 User area: 7.28 GiB(7,818,182,656 bytes)

Cache size: 1 MiB

Hardware reset function: 1

Partition configuration: 0x48

 Boot acknowledge is sent during the boot operation

 Boot partition 1 is enabled for boot

Partitioning support: 0x07

 Device support partitioning feature

 Device can have enhanced technological features

 Device partitioning possible

Boot configuration protection: 0x00

Boot bus conditions: 0x00

Boot area write protection: 0x00

(Nokia 1 dump)

ANDROID System Info:

 platform: MT6737M, cpu abi: armeabi-v7a

 manufacturer: alps

 board: Frontier_00WW, name: Frontier_00WW

 brand: Nokia, model: Nokia 1 ()

 build model list: Nokia 1 ()

 build id: O11019, version: 8.1.0 [Oreo] (00WW_1_40A)

 build description: Frontier_00WW-user 8.1.0 O11019 00WW_1_40A release-keys

crypto state: encrypted?

Selected: [HYNIX] H9TQ64A8GTCCUR/8GB   (BGA221)

 

TITANIC T-90 FLASH FILE SP7731G 6 READ BY CM2 100% TESTED FLASH BY CM2

 Wait for device ... 

Device Connected!

BootVersion : SPRD3

Boot : INF : 0_SC7731x_BASE : SC7731G_eMMC_1GB_NS

Sending Init Boot ... 

Boot sent!

Kick FDL ... 

Kick FDL again ... 

BootVersion : Spreadtrum Boot Block version 1.1

Protocol setup ... 

Port speed : 921600

Sending Flash Boot ... 

Boot sent!

Kick FLASH FDL ... 

ProtoEx :  : TRCC not supported!

FDL : Control transfered!

Boot Done!

Device info : 

Patch Level    : MRA58K

Display ID     : X98_S5_J106G_TITANIC_T-90_B1B8_V001_20200712

Ver. Incmt     : root-103233

Ver. CodeName  : REL

Ver. Release   : 6.0

Sec. Patch     : 2016-07-01

Build Time     : 1594546736

Product Brand  : TITANIC

Product Name   : sp7731g_1h10_hd_oversea

Product Device : sp7731g_1h10

Product Board  : sp7731gea_hdr

Product Manfct : TITANIC

Board Platform : sc8830

Product Info   : sp7731g_1h10

Product Model  : T-90

AndroidVer : 6

VlnrLevel : 0x01

SC8830__TITANIC__T-90__6.0__X98_S5_J106G_TITANIC_T-90_B1B8_V001_20200712__MRA58K__sp7731g_1h10

Read : prodnv.img

ExtSparse : Compression ratio : 86%

Read : phase.cfg

Read : wmodem.bin

Read : wdsp.bin

Read : wnvitem.bin

Read : modem_wcn.img

Read : wcnnvitem.bin

Read : boot_logo.bmp

Read : fastboot_logo.bmp

Read : logo2.bin

Read : logo3.bin

Read : logo4.bin

Read : logo5.bin

Read : boot.img

Read : system.img

ExtSparse : Compression ratio : 87%

Make : persist.img

Read : sysinfo.bin

ExtSparse : Compression ratio : 4%

Make : cache.img

Read : recovery.img

Make : userdata.img

Read : u-boot.bin

Read : u-boot-spl.bin

Firmware size : 0x49AE9FB8 ( 1.15 GiB )

Android Info saved : _Android_info.txt

Reconnect Power/Cable!

Done!

Elapsed: 00:06:31

Redmi Note 5 DUMP FILE 512MB READ BY UFI BOX

Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed

Interface: UFI High-Speed

Serial number: 0011-8842-5443

 Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)

Insertion test... Done

Init bus...

VCC: 3.3 V, VCCQ: 3.0 V

Bus: 8 bit (HS SDR 24MHz)

Access mode: sector mode

Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)

 Card/BGA: BGA (Discrete embedded) - High density MMC

 Manufacturer ID: 0x90 (SK Hynix)

 Product name: HCG8a4 (0x484347386134), rev: 0xA2, serial number: 0x0AE9E07F

 Manufacturing date: Apr 2018

CID: 90014A48 43473861 34A20AE9 E07F45E8

CSD: D0270132 8F5903FF FFFFFFEF 8A400026

EXT_CSD revision: 1.8 (MMC v5.1) 

Partition info:

 Boot1: 4 MiB

 Boot2: 4 MiB

 RPMB: 4 MiB [Provisioned, counter: 50432]

 User area: 58.24 GiB(62,537,072,640 bytes)

Cache size: 1 MiB

Hardware reset function: 1

Partition configuration: 0x00

 No boot acknowledge is sent (default)

 Device is not boot-enabled (default)

Partitioning support: 0x07

 Device support partitioning feature

 Device can have enhanced technological features

 Device partitioning possible

Boot configuration protection: 0x00

Boot bus conditions: 0x00

Boot area write protection: 0x00

   note5dump

ANDROID System Info:

 platform: sdm660, cpu abi: arm64-v8a

 manufacturer: Xiaomi

 board: sdm636, name: whyred

 brand: xiaomi, model: Redmi Note 5

 build model list: Redmi Note 5

 build id: PKQ1.180904.001, version: 9 [Pie] (PKQ1.180904.001)

 build description: whyred-user 9 PKQ1.180904.001 V11.0.3.0.PEIMIXM release-keys